home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Libris Britannia 4
/
science library(b).zip
/
science library(b)
/
HAM_RAD
/
3176.ZIP
/
ICOM2.ZIP
/
IC761.1
< prev
next >
Wrap
Text File
|
1990-08-27
|
700b
|
15 lines
IC761.1
IC-761 ACTIVATE TUNER WHEN IN GENERAL COVERAGE MODE
Remove the top cover of the IC-761 and locate the tuner band switch unit
PC Board which is the 2nd small PC board located behind the antenna tuner
preset unit. On the board, locate J 7 and at that location, you will note
a three (3) pin molex plug with a black, brown, and red wire connected to
it. Either unplug, remove, or clip the center brown wire coming from the
plug. Carefully unplugging the wire and placing heat shrink tubing over
the end works very well. This enables the tuner to be activated on GENERAL
as well as the ham bands.
RELAYED BY...N0KGX...GENE